805nm 2W 100μm Aperture B-Mount Laser Diode with Microlens
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 14 Days |
| Refund Will Be Given As | Money Back |
| MPN | Does Not Apply |
| Brand | Current |
| Model | Microlens |
This is an 805nm laser diode,which can output 2W optical power from its 100μm aperture. It was bonded onB-Mount, which was made in the USA. Microlens (FAC lens) is attached on the B-Mount. It came to us with a lot of otherelectronic/opto-electronic related surplus. We have 1 such lasers in stock.The lasers are brand new not used. Specifications: Characteristics Specification 805nm 2W B-Mount Laser Diode with Microlens CW output power (W) 2.0 Peak wavelength (nm) 803.0 — 806.0 Spectral width (nm) ≤4 Threshold current (A) ≤0.5 Operating current (A) ≤2.5 Slope efficiency (W/A) ≥1.0 Beam divergence θ∥×θ⊥ (deg.) 8/1.5 Wavelength temperature coefficient (nm/℃) 0.3 Emitting area (μm) 100×1 Lifetime(hour) >10,000 Package B-Mount with Microlens Data Sheet Available for each diode By Bidding,you must agree and accept:· You are over 18 years old and understand the dangers andrisks of laser use, and will use this component responsibly. · You will use this component in a legal, safe manner toensure audience and personnel safety.· You have a working knowledge of laser diodes. You understandESD, and the static sensitivity of this component.· Laser beam is harmful for eyes during process. Please avoidany directly see on the aperture. Never shine laser beam on human or animals.· You accept these diodesas electronic components for integrating them into a system designed byyourself. You relieve the SELLER, and E-bay from any and all LIABILITY fromdamage or injury that may arise from use of this laser. If you are not serious, please do not placea bid. Returnpolicy:· We will test the lasers before shipment; buyer shouldcontact us as soon as he find it is defective;· Refund request should be made within 14 days buyer receivesthe product;· Replacement request should be made within 30 days buyerreceives the product;· Since this is a Do-It-Yourself laser diode, we only refundif the product arrive to be defective; so please use it gently and properlywhen you assemble your device; you also need to send back in originalshape to get refund/replacement; we won't refund or replace if the laser wasdamaged by buyers; Some tipsfor operating laser diode:· Please use a power supply with stable output. Transientcurrent spikes should be avoided.· Please always connect the pins correctly.· Heat sink with good thermal dissipation is required forholding the laser otherwise the laser will be burned.· Please use eye protection when you operate the laser.· It is betterto wear an antistatic wrist band.· You shouldalways start with current well below the diodes maximum (about 2.5 amps in thiscase).