The CD60 running capacitor is suitable for the start-up of AC motors with frequency of 50Hz and 60Hz, such as air compressors, pressure washers, air conditioners, washing machines, motors, generators, HVAC, fans, compressors, refrigerators, etc.Specification:Model: CD60Shell Color: BlackMaterial: Metallized Polypropylene FilmLead End: 2+2 insertRated Capacity:...
Description:Model: CD60; Lead End: 2+2 insert; Rated Capacity: 270-324uF/Mfd; Rated Voltage: 125V; Operating Temperature: -10/55/21 ℃; Body Size: 35 x 70 mm / 1.4 x 2.8 inch (D*H)Advantage: Our CD60 run capacitor has characteristics of small volume, lightweight, low loss, strong overload ability, long service...
Round Shaft BarWhy Choose This:★Specifications: Diameter: 6mm / 0.24"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63★Use Note: Please add some oil during storage and reduce contact with air or do not expose to...
Descriptions:Fits for drills, flex shafts, bench drills, and hanging mills.Suitable for drilling holes in glass, shells, etc.Note: Adding the coolant can increase work efficiency and extend service life.Specifications:Color: Silver ToneMaterial: Diamond, High-Speed SteelDrill Bit Diameter: 1mm / 0.04-inchDrill Bit Length: 11mm / 0.43-inchShank Diameter: 0.7mm...
Features:1. Metric thread tap features plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.2. High-speed steel tapping tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance,...
Specifications:Thread Size: 5/16-18 UNCThread Length: 23mm / 0.91"Total Length: 70mm / 2.76"Square End Size: 5mm x 5mm / 0.2" x 0.2"Thread Tolerance Grade: H2Material: HSS (High Speed Steel)Finish: UncoatedCutting Direction: Right HandNumbers of Flutes: 3 FlutesPackage Content: 1 x Spiral Point Threading TapDescriptions:1. Spiral point...
Features:Diameter: 3mm / 0.118"Length: 150mm / 6"Material: HSS (High Speed Steel)Finish: PolishedHRC: 61-63Package Content: 10 Pcs x Round Steel Metal RodsDescriptions:1. Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle. Rods can be cut and formed into replacement parts...
Specifications:Cutting Diameter: 10mm / 0.39"Cutting Flute Length: 25mm / 0.98"Shank Diameter: 10mm / 0.39"Overall Length: 75mm / 3"Material: Solid Carbide (P05 Carbide)Finish: AlTiN CoatedCutting Hardness: HRC45Number of Flutes: 2 FlutesEnd Cut Type: Square EndSpiral Angle: 35 DegreePackage Content: 1pcs x Square Nose End MillDescriptions:P05 carbide...
Specifications:Cutting Diameter: 5mm / 0.2"Cutting Flute Length: 13mm / 0.51"Shank Diameter: 5mm / 0.2"Overall Length: 50mm / 2"Material: Solid Carbide (M30 Carbide)Finish: AlTiN CoatedCutting Hardness: HRC55Number of Flutes: 4 FlutesEnd Cut Type: Square EndSpiral Angle: 35 DegreePackage Content: 1pcs x Square Nose End MillDescriptions:M30 carbide...
This 90 Degree Elbow Hose Barb Fitting can be applied to various industries, such as refrigeration, automobile fitting, HVAC, stack piping, automotive, air intake, cooling systems, intercooler piping setup, brewery equipment, mechanical, food, brewing, dairy, wine and beverage etc. It's polished, widely used in highly...