79Pcs 5.10Lbs. New Washington Alloy Welding Rod. 3/32" X 36". NEW, in box BOX IS IN POOR CONDITION. If your item is received in a different condition than stated (DOA, not working properly etc. NEW, no box. )....
Washington Alloy Gasless Wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge (using .030) without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110-volt welding machines,...
Washington Alloy Gasless Wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge (using .030) without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110-volt welding machines,...
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires. The high...
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires. The high...
ER309L is similar to ER309 but contains an average .02% carbon to provide a weld deposit that will offer good resistance against intergranular corrosion caused by carbide precipitation. ER309L is excellent for buttered passes and overlay work. Typical applications include those of ER309 welding wire....
ER309L is similar to ER309 but contains an average .02% carbon to provide a weld deposit that will offer good resistance against intergranular corrosion caused by carbide precipitation. ER309L is excellent for buttered passes and overlay work. Typical applications include those of ER309 welding wire....
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires. The high...
ER70S-6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires. The high...
ER309L is similar to ER309 but contains an average .02% carbon to provide a weld deposit that will offer good resistance against intergranular corrosion caused by carbide precipitation. ER309L is excellent for buttered passes and overlay work. Typical applications include those of ER309 welding wire....