The resin component or the PART A may crystallize due to cold temperature exposure. These crystals are insoluble in epoxy resin resulting in contamination and causes poor cure such as surface blushing....
MAX CLR-TC A/BCLEAR LIQUID RESIN -TOP COAT3/4 Gallon Combined Volume½-Gallon of MAX CLR-TC PART A RESINAND1-Quart MAX CLR-TC PART B CURING AGENTFormulated With Surfactants That Improve Substrate Wetting, Reduce Air Bubble EntrapmentEliminate Surface Blemishes Such As Bénard Cells, Orange Peeling, Fish Eyes, Pin Holes, And...
PROPER EPOXY MIXING TECHNIQUE - Avoid tacky or uncured spots and low air bubble mixing - YouTubeVideo will open in a new window · Allow the applied resin to fully cure for a minimum of 48 hours at 75°F before exposing the coating to any...