Aalbadent Verabond II 208 Grams Nickel Chromium Alloy Metal Ceramic Non-Be
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Brand | Aalbadent |
Dentistree USA Best Pricing Fast Shipping High QualityAalbadent Verabond II 208 Grams Nickel Chromium Alloy Metal Ceramic Restoration100% Rating Tensile Strength psi (MPa) 119,000 (821) Yield Strength psi (MPa) 82,000 (566) Elongation Percent % 4 Vickers Hardness HV1 440 Density g/cm3 8.1 Color White Coefficient of Expansion (@500°C) X10-6 14.1 Melting Range °F (°C). 2,192-2,393 (1,200-1,312) Composition Ni 76.5% Cr 11.5% Mo 3.5% Nb, Al, Si, Ti VeraBond II is a premium, high strength, nickel-chromium alloy developed with your ceramic creations in mind. VeraBond II provides a coefficient of thermal expansion designed to match traditional medium-grain porcelains like Ceramco, Noritake and many other modern ceramic powders. Its melting range provides added thermal stability during porcelain bonding to protect against sag and other mechanical deformations. VeraBond II’s combined yield strength, modulus of elasticity and elongation provides you with true type 5 mechanical properties which exceed the minimum requirements established in ISO 22674. VeraBond II offers unique formulation benefits provided by niobium for lighter oxidation, reliable porcelain bonding and increased fluidity during casting. VeraBond II’s non-Be formulation provides you with safety and improved industrial hygiene, while exceeding your performance expectations of conventional non-Be base metal formulations. In vitro studies prove VeraBond II is corrosion resistant and bio-compatible; the formation of a tenacious, micro-thin, passive oxidation layer provides corrosion protection. With over two decades of proven clinical service, you can prescribe VeraBond II with confidence. APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal sub-structure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. PORCELAIN COMPATIBILITY VeraBond II performs best with traditional medium grain porcelains: Ceramco, Spectrum, Noritake, Synspar, Shofu-halo, as well as other commercially available medium-grain porcelains. The sale of this product may be subject to regulation by the US Drug and Food Administration and state and local regulatory agencies. If so, bid on this item if you are an authorized purchaser. If the item is subject to the FDA regulation, we will verify your status an authorized purchaser of this item before shipping. You can contact us at Strident Inc, 11405 nw 122nd st Medley FL 33178 Payment ShippingWe accept payment by any of the following methods: PayPal Please pay as soon as possible after purchasing, as that will allow us to post your item to you sooner!We offer competitve shipping rates on all products.Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it very quickly. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30-60 days from the date you purchased it, depending upon the product. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.Returns Best Pricing Fast Shipping High QualityTensile Strength psi (MPa) 119,000 (821) Yield Strength psi (MPa) 82,000 (566) Elongation Percent % 4 Vickers Hardness HV1 440 Density g/cm3 8.1 Color White Coefficient of Expansion (@500°C) X10-6 14.1 Melting Range °F (°C). 2,192-2,393 (1,200-1,312) Composition Ni 76.5% Cr 11.5% Mo 3.5% Nb, Al, Si, Ti VeraBond II is a premium, high strength, nickel-chromium alloy developed with your ceramic creations in mind. VeraBond II provides a coefficient of thermal expansion designed to match traditional medium-grain porcelains like Ceramco, Noritake and many other modern ceramic powders. Its melting range provides added thermal stability during porcelain bonding to protect against sag and other mechanical deformations. VeraBond II’s combined yield strength, modulus of elasticity and elongation provides you with true type 5 mechanical properties which exceed the minimum requirements established in ISO 22674. VeraBond II offers unique formulation benefits provided by niobium for lighter oxidation, reliable porcelain bonding and increased fluidity during casting. VeraBond II’s non-Be formulation provides you with safety and improved industrial hygiene, while exceeding your performance expectations of conventional non-Be base metal formulations. In vitro studies prove VeraBond II is corrosion resistant and bio-compatible; the formation of a tenacious, micro-thin, passive oxidation layer provides corrosion protection. With over two decades of proven clinical service, you can prescribe VeraBond II with confidence. APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal sub-structure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. PORCELAIN COMPATIBILITY VeraBond II performs best with traditional medium grain porcelains: Ceramco, Spectrum, Noritake, Synspar, Shofu-halo, as well as other commercially available medium-grain porcelains. Best Pricing Fast Shipping High Quality Dentistree USAAalbadent Verabond II 208 Grams Nickel Chromium Alloy Metal Ceramic Restoration100% Rating Tensile Strength psi (MPa) 119,000 (821) Yield Strength psi (MPa) 82,000 (566) Elongation Percent % 4 Vickers Hardness HV1 440 Density g/cm3 8.1 Color White Coefficient of Expansion (@500°C) X10-6 14.1 Melting Range °F (°C). 2,192-2,393 (1,200-1,312) Composition Ni 76.5% Cr 11.5% Mo 3.5% Nb, Al, Si, Ti VeraBond II is a premium, high strength, nickel-chromium alloy developed with your ceramic creations in mind. VeraBond II provides a coefficient of thermal expansion designed to match traditional medium-grain porcelains like Ceramco, Noritake and many other modern ceramic powders. Its melting range provides added thermal stability during porcelain bonding to protect against sag and other mechanical deformations. VeraBond II’s combined yield strength, modulus of elasticity and elongation provides you with true type 5 mechanical properties which exceed the minimum requirements established in ISO 22674. VeraBond II offers unique formulation benefits provided by niobium for lighter oxidation, reliable porcelain bonding and increased fluidity during casting. VeraBond II’s non-Be formulation provides you with safety and improved industrial hygiene, while exceeding your performance expectations of conventional non-Be base metal formulations. In vitro studies prove VeraBond II is corrosion resistant and bio-compatible; the formation of a tenacious, micro-thin, passive oxidation layer provides corrosion protection. With over two decades of proven clinical service, you can prescribe VeraBond II with confidence. APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal sub-structure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. PORCELAIN COMPATIBILITY VeraBond II performs best with traditional medium grain porcelains: Ceramco, Spectrum, Noritake, Synspar, Shofu-halo, as well as other commercially available medium-grain porcelains. The sale of this product may be subject to regulation by the US Drug and Food Administration and state and local regulatory agencies. If so, bid on this item if you are an authorized purchaser. If the item is subject to the FDA regulation, we will verify your status an authorized purchaser of this item before shipping. You can contact us at Strident Inc, 11405 nw 122nd st Medley FL 33178 Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after purchasing, as that will allow us to post your item to you sooner! ShippingWe offer competitve shipping rates on all products.Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it very quickly. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30-60 days from the date you purchased it, depending upon the product. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. High Quality Fast Shipping Best Pricing Tensile Strength psi (MPa) 119,000 (821) Yield Strength psi (MPa) 82,000 (566) Elongation Percent % 4 Vickers Hardness HV1 440 Density g/cm3 8.1 Color White Coefficient of Expansion (@500°C) X10-6 14.1 Melting Range °F (°C). 2,192-2,393 (1,200-1,312) Composition Ni 76.5% Cr 11.5% Mo 3.5% Nb, Al, Si, Ti VeraBond II is a premium, high strength, nickel-chromium alloy developed with your ceramic creations in mind. VeraBond II provides a coefficient of thermal expansion designed to match traditional medium-grain porcelains like Ceramco, Noritake and many other modern ceramic powders. Its melting range provides added thermal stability during porcelain bonding to protect against sag and other mechanical deformations. VeraBond II’s combined yield strength, modulus of elasticity and elongation provides you with true type 5 mechanical properties which exceed the minimum requirements established in ISO 22674. VeraBond II offers unique formulation benefits provided by niobium for lighter oxidation, reliable porcelain bonding and increased fluidity during casting. VeraBond II’s non-Be formulation provides you with safety and improved industrial hygiene, while exceeding your performance expectations of conventional non-Be base metal formulations. In vitro studies prove VeraBond II is corrosion resistant and bio-compatible; the formation of a tenacious, micro-thin, passive oxidation layer provides corrosion protection. With over two decades of proven clinical service, you can prescribe VeraBond II with confidence. APPLICATIONS Porcelain fused to metal (PFM), single units, long-span multiple unit bridgework, maryland bridge, metal sub-structure for polymer resins (acrylic & composites), full cast crowns, implant superstructures. PORCELAIN COMPATIBILITY VeraBond II performs best with traditional medium grain porcelains: Ceramco, Spectrum, Noritake, Synspar, Shofu-halo, as well as other commercially available medium-grain porcelains.